|
| Products for Research Inc.ARCHIVE |
Group DataQuick IndexPower IndexArchive Cross ReferenceContents (Home) |
TE176TSRF and TE176TSRF 001
(for 53.4 mm diameter end on PMT's)
| Specifications: | |
| Photocathode temperature stability | ± 0.1°C over entire range |
| Temperature controller setability | ± 0.1°C from ambient to -100°C |
| LN2 consumption rate | Approximately 0.75 l/hr at -100°C operation |
| Standard window material | Evacuated Double Pane Plexiglas 80% transmission from 366 nm to 1125 nm |
| Mounting | Front and bottom mounting holes are provided |
| Front Mounting via 6 inch (15.2 cm) Standard Front Mounting Adapter Compatible with Model PR302 Light Shutter Assembly | |
| Weight | Chamber - 12 lbs. (5.5 kg) Power supply - 6 lbs. (2.7 kg) |
| Power required | 15 Watts at either 115 V~, 50/60 Hz or 220 V~, 50/60 Hz |
| Options: Options 3, 20, 21, 25, and 31 - not available | |
| Special notes: Specify TE176TSRF 001 if valving for self pressurizing dewars is required. TE176TSRF and TE176TSRF 001 can be used with the PR411 Defocusing Magnet when the PMT is appropriate. These types have been replaced by the Models PC176TSCE and PC176TSCE 001 . | |
|
|
Marked
