Products for Research Inc.

ARCHIVE

Outline Drawing and Specifications

TE321RF and TE321TSRF
Liquid Heat-Exchanged Thermoelectric

(for 64 mm nominal diameter end-on MCP PMT's)

Outline Drawing
BACK TO TOP

Specifications: TE321RF and TE321TSRF
Guaranteed T - Ambient liquid to photocathode	> 40°C with ambient liquid warmer than 0°C
Cool down time to stability of photocathode	< 2 hours Performance Graph (21K)
Standard window material	Special 0.5 inch (12.7 mm) thick Evacuated Double Pane Plexiglas 80% transmission from 366 nm to 1125 nm
Mounting	Front and bottom mounting holes are provided
Front Mounting via Integral Front Surface Hole Pattern The same as the 6 inch (15.2 cm) Standard Front Mounting Adapter Pattern. Compatible with Model PR302 Light Shutter Assembly
Weight	Chamber - 17.5 lbs. (7.9 kg) Power supply - 13 lbs. (5.9 kg)
Power required	85 Watts at either 115 V~, 50/60 Hz or 220 V~, 50/60 Hz
Options:TE321RF includes Options 7 and 11 • TE321TSRF includes Options 7, 11 and 36 Options 3, 10, 20, 21 and 25 - not available
Special notes: The TE321RF and TE321TSRF provide 30 mm PMT front window to mounting surface distance for close proximity to light source. This system is available in other housing configurations - consult factory. Models TE321RF and TE321TSRF can be used with the PR600 Recirculating Liquid Heat Exchanger. These types have been replaced by the Marked , PHOTOCOOL Models PC321CE and PC321TSCE .

Specifications
BACK TO TOP

Outline Drawing of TE321RF and TE321TSRF

BACK TO TOP