Products for Research Inc.

ARCHIVE

Outline Drawing and Specifications

TE355RF and TE355TSRF
Forced Air Heat-Exchanged Thermoelectric

(for 1.1 inch (30 mm) or less nominal diameter side-on PMT's)

Outline Drawing
BACK TO TOP

Specifications: TE355RF and TE355TSRF
Guaranteed T - Ambient air to photocathode	> 40°C with ambient air warmer than 0°C
Cool down time to stability of photocathode	2 hours Performance Graph (10K)
Standard window material	Evacuated Double Pane Plexiglas 80% transmission from 366 nm to 1125 nm
Mounting	Front and bottom mounting holes are provided
Front Mounting via 4 inch (10.2 cm) Standard Front Mounting Adapter Compatible with Model PR305 Light Shutter Assembly
Weight	Chamber - 10 lbs. (4.1 kg) Power supply - 12 lbs. (5.4 kg)
Power required	50 Watts at either 115 V~, 50/60 Hz or 220 V~, 50/60 Hz
Options:TE355RF includes Options 7 and 11 • TE355TSRF includes Options 7, 11 and 36 Options 3, 5, 10, 19, 20, 21, 24, 25, 27 28, 29 and 30 - not available
Special notes: Models TE355RF and TE355TSRF use the same socket assembly configuration as Products for Research housings for 2 in (53 mm) nominal diameter PMT'S. This provides the same degree of flexibility as is available for the socket assemblies used with larger housings. These types have been replaced by the Marked , PHOTOCOOL Models PC355CE and PC355TSCE .

Specifications
BACK TO TOP

Outline Drawing of TE355RF and TE355TSRF

BACK TO TOP